High Pressure Ball Valve – Misting Zone Valve

Item Code: HPBV
Price:  $27.20

High Pressure Ball Valve – Misting Zone Valve

Item Code: HPBV
Price:  $27.20
* Required

High Pressure Ball Valve – Misting Zone Valve

Choose which parts of your misting system run with a quarter turn of the handle. Fit a high pressure ball valve on each line and you can mist the patio without misting the pool area, or switch off one section while you work on it.

Zoning your misting system

Each valve controls one line, so with valves fitted you can split one pump across several areas and run only the zones you need.

The number of nozzles running at any time must stay within your pump’s minimum and maximum. Too few nozzles open can strain the pump, and too many will drop the pressure and the mist quality.

The EcoMist-50i suits zoning best. It adjusts automatically to the number of nozzles running and can run as few as 2, so you can open and close zones freely.

Not sure how many nozzles each zone should have? Call us on 07 4946 4702 and we’ll help you plan it.

Why fit a ball valve? 

  • Run only the areas you’re using, which saves water.
  • Shut off one line for cleaning or repairs while the rest keeps running.
  • A quarter turn opens or closes the line fully.
  • Rated for high pressure misting systems

Key specs

Type: manual inline ball valve

Connection: 1/4" or 3/8" 

Suits: Nylon tube or Stainless steel pipe

Where to install it? 

Fit one valve at the start of each zone, after the line splits from the main feed. Choose a spot where the handle is easy to reach. It’s also handy to have one near the pump, so you can isolate the whole system for servicing.

Care

Turn the valve fully open and closed a few times at the start of each season to keep it moving freely. A good water filter stops grit from wearing the valve and blocking your nozzles.

Troubleshooting

  • Drip at a joint: turn off and depressurise, recut the tube squarely, and refit it.
  • Handle stiff: work it open and closed a few times with the system depressurised.
  • Zone still mists when closed: debris may be caught in the valve. Flush the line, then check your filter cartridge.

FAQs

  • How many valves do I need? One for each zone you want to switch on and off separately.
  • Will it suit my pump? It suits all our high pressure misting systems. Just keep the nozzles running within your pump’s minimum and maximum.
  • Which pump is best for zones? The EcoMist-50i, because it adjusts automatically and can run as few as 2 nozzles.
  • Can it be installed outdoors? Yes, it’s made for outdoor misting lines.
  • Do I need a filter? Yes, we recommend one to protect your valves, pump and nozzles.